1. <b id="9ghtq"></b>
        1. <acronym id="9ghtq"></acronym>

          <b id="9ghtq"><wbr id="9ghtq"><ins id="9ghtq"></ins></wbr></b>

          Home > Lubrication > Common Sense
          A、Definition of lubricating grease:
          Lubricating grease is a kind of solid or semifluid product that is made by diverting thickener to liquid lubricant, as well as by adding some additives to improve its properties.
          Base Oil 70%~96%           Thickener 4%~30%          Additives 0.1%-10%
          C、Using properties:
          1、 Strong carrying capacity
          2、 Wide range of working temperature
          3、 Small creep coefficient
          4、 Long service life
          5、 Good sealing property
          6、 Well resistant to rust and corrosion
          1、 Bad functions of the cooling and ventilation for high viscosity
          2、 It is more trouble to add and exchange lubricating grease than that of lubricating oil.
          3、 It is not easy to clean water and impurities.
          4、 Large starting torque

          D、Category of lubricating grease
          1、 Distribute according to thickener
          2、 Distribute according to use
          3、 Distribute according to application part
          4、 Distributing according to working properties

          E、Quality index
          Observe the color, transparence, adhesivity, homogeneity and fiber quality of lubricating grease.
          2.Dropping point
          Observe the temperature when the first dropping from grease cup in the condition of heating.
          It is use to express the index and thickness, softness and hardness of lubricating grease. Observe the depth when standard cone falls freely into grease in five second in 25℃. The unit is 0.1mm.
          4.Dissociative acid and alkali
          It is content of organic acid or superfluous alkali that is not saponified.
          5.Water contetnt
          It is the content of configurable water and dissociative water.
          6.Mechanical impurities
          It is undissolved substance in lubricating grease like sand particles, metal particles and so on.
          7.Colloid stability
          It is the capacity that prevents base oil from being separated from greasing oil.
          8.Mechanical stability
          It is the capacity of being resistant to mechanical cutting.
          9.Oxidation stability
          It is the capacity of being resistant to air oxidation
          10.Corrosion test
          It is used to test whether it is rust to metal.
          11.Rust protection
          It is the capacity that prevents metal from being rust.
          12.Water resistance
          It is the capacity that there is no dissolution, no emulsification in water, and there is no obvious change while contacting with water.
          13.Evaporating property
          It is to express the change of properties for the evaporation of base oil during the storing and using.
          14.Rubber compatibility
          It is the capacity of no obvious change in size, quality, hardness and tensile strength while contacting with rubber.
          15.Apparent viscocity
          It is the property of preventing mutual mobility caused by internal friction.
          16.Wear resistance
          It is to express its carrying capacity, friction coefficient, wear resistance and sintering load.
          17.Torque in low temperature
          It is the capacity of retarding low-speed rolling bearings in low temperature.
          18.Service life
          It is used to forecast the service life of lubricating grease.
            CopyrightCopyright @ Wuxi Feitian Grease Limited Co., Ltd All Rights Reserved. Recruitment | Contact Us | OA